液氮制冷低气压试验箱的仿真设计

在采用液氮制冷的低气压试验箱的设计中,用常规工程设计方法计算的降温过程冷负荷过大,从而导致真空系统设计容量过大。本文采用分布参数模型对试验箱低气压条件下降温过程的冷负荷进行了精确仿真模拟,以此作为真空系统容量设计的基础,减小了设计规模,取得了良好的效果。     

FSC在重整加氢装置中的应用

介绍了故障安全控制系统(FSC)的构成及特点，并结合实际给出了其在重整加氢装置的配置、输入／输出的组成以及应用体会。     

离心式井下增压装置的系统设计

针对目前国内外超高压射流钻井技术采用柱塞式增压器普遍存在寿命短、工作可靠性差的问题,提出离心式井下增压装置的结构设计方案。这种增压装置由动力单元(涡轮动力机)、固液分离单元、增压单元(离心泵)和流道短节单元组成,通过钻井液驱动涡轮动力机旋转,并带动固液分离装置和离心泵高速旋转,使部分钻井液增压,达到提高射流压力和速度的目的。现场试验证明,这种离心式井下增压装置可使钻井液在井底的压力达到30MPa。     

Determination of polymer–polymer interaction parameters using inverse gas chromatography

A modified method is discussed that is based on Farooque and Deshpande's method to obtain polymer–polymer interaction parameters using inverse gas chromatography (IGC) data. In the Farooque and Deshpande method, the ratio of the difference of probe–polymer interaction parameters between two polymers and the probe volume [(χ₁₂ ? χ₁₃)/V₁] is used as the abscissa. In the modified method, the ratio [(?₂χ₁₂ + ?₃χ₁₃)/V₁] is used as the abscissa. Experimental data previously reported for a poly(?‐caprolactone)‐polyepichlorohydrin (PCL/PECH) blend and a poly(ethyl acrylate)‐poly(vinyl propionate) (PEA/PVPr) blend are analyzed. It is found that the slopes obtained by the new method had smaller deviations from the theoretical values than the Farooque and Deshpande method. The standard deviations of both slopes and intercepts obtained from the new method are also smaller. Using the new method, the polymer–polymer interaction parameters obtained from the intercept are negative numbers for the PCL/PECH system and very small positive numbers for PEA/PVPr. Explanations are given for the probe and concentration dependency of the polymer–polymer interaction parameters that are generally observed in IGC studies. A new method for selecting the best probe for calculating the interaction parameter is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 671–680, 2003     

非线性系统Wiener模型辨识

本文采用不同幅值的三电平伪随机m序列作为输入信号,辨识了离散非线性系统Wiener 模型的线性脉冲响应函数和非线性增益系数.同时讨论了参数估计的统计特性及其区间估 计,并附有仿真结果.     

参数设计法在铝电解电容器设计中的应用探讨

论述了参数设计法在铝电解电容器设计开发阶段的应用。文中阐明了铝电解电容器的主要质量特性(损耗因子、电容量)及芯包外径的参数设计原理,并建立了归一化函数作为优选设计方案的判据。实例证明在铝电解电容器的设计过程中应用参数设计法以减小产品质量特性变异是有效的。     

On an Interactive Network Security Measur

The development of the global information highway has brought great impetus and impact to every domain of the world: science, technology, economy and culture as well. Information security of network as an integrated system engineering needs a long period of tackling key problems and planning in such fields as researching and application. The threats to network security can be classified as: hacking, inside attack, computer virus, leak of secret message and modification of key data in network. …     

局部散射源参数估计的非线性算子方法

本文利用单次快摄数据的两个非线性算子估计局部散射源中心波达方向和角扩展,与多维参数搜索和其他低复杂性的局部散射源参数估计算法不同,非线性算子方法给出了单次快摄的局部散射源参数估计的闭式解,无需进行多维搜索和子空间分解。     

正交参数与平纹面

本文证明了一族闭曲线C(t),t∈I,称变闭曲线,在光滑性条件下,具有正交参数u,即当C(t)表为(?)=(?)(u,t)时,有(?)·(?)≡0.接着,文中提出了一种“降维法”,即用一族平行平面将空间曲面截成平面变曲线,并讨论其若干整体性质.